Dimensions: 220X39 cm
Alba 220 will bend about 2.5 cm for each 100 kg of weight, and weighs about 4.4 kg, with male pin, wheels on a safe rigid caster, and dock side eye bolts for trapeze and guys.
Signature UV protected carbon fiber finishing with grey non-slip tread finish.
Spare parts kit included.

Dimensions: 216x39 cm
UV protected carbon fiber finishing with non-slip tread.
(See below for different colors, yacht name or teak tread surface)
Integral carbon fiber hinges with anti-folding restraint.
With male pin, wheels dock side, and eye bolts for trapeze and guys.
Spare parts kit included.

Dimensions: 285x45 cm
UV protected carbon fiber finishing with non-slip tread.
(See below for different colors, yacht name or teak tread surface)
Integral carbon fiber hinges with anti-folding restraint.
With male pin, wheels dock side, and eye bolts for trapeze and guys.
Spare parts kit included.

Dimensions: 350X60 cm
UV protected carbon fiber finishing with non-slip tread.
(See below for different colors, yacht name or teak tread surface)
Integral carbon fiber hinges with anti-folding restraint.
With male pin, extra large wheels dock side, and eye bolts for trapeze and guys.
Spare parts kit included.

In the next step, you'll choose the type of fittings for your installation. The fittings for horizontal surfaces are comprised in the price of the ladder, with a surcharge in case you want to install on a sloping surface. If you need to install the ladder in further positions, you can buy additional kits at their full price, checking the "additional fitting position kits" further down below.
The Stabilized Hull Pads (included in the price offered) have swivelling feet, with a maximum angle of 15° from vertical to work well.

Every ladder needs a minimum of 8 cm deck surface to fit the Deck Sockets.
Other than that, it can be installed on almost any kind of position on a vessel, with the appropriate accessories, and you must choose the type of fittings you need for your installation.
The basic fittings are comprised in the price of the ladder, with additional cost for more complex fitting systems.
If you need to install the ladder in further positions, you can buy additional kits at their full price, checking the "additional fitting position kits" further down below.

Uncomparable comfort, while maintaining the function of a permanent safety ladder on the stern platform.
It can be folded on deck, or detached completely in a couple of seconds with its spring loaded locking pins.
The "2 parts" variants can be divided for easier storage.
The "Folding" is very useful in case the swim platform isn't deep enough for a full length ladder.

Quantum 90 is supplied in Naked Carbon™ carbon finishing: an exclusive Exitcarbon finish that consists of carefully polishing the carbon as it comes out of the mold. You can choose to have it transparent glossy painted or colored for an additional cost.

Millennium 105 is supplied in Naked Carbon™ carbon finishing: an exclusive Exitcarbon finish that consists of carefully polishing the carbon as it comes out of the mold. You can choose to have it transparent glossy painted or colored for an additional cost.

Orion 120 is supplied in Naked Carbon™ carbon finishing: an exclusive Exitcarbon finish that consists of carefully polishing the carbon as it comes out of the mold. You can choose to have it transparent glossy painted or colored for an additional cost.

Available with 2 variants: 1) polyester lateral guys or 2) Dyneema lateral guys.

The polyester guys are built with a double polyester rope with a sliding SS carabiner on the gangway side, Block with V-Jam Cleat for adjustment and a loop to fix them to the boat.
The Dyneema (R) guys have a shorter double polyester rope joined with a Low Friction Ring to the Dyneema end rope on the gangway side.

Trapeze with 4 meter long Dyneema ropes and carbon spreader bar. The ultra-light Dyneema ropes and the carbon spreader reduce the sagging of the trapeze under its own weight, allowing an unobstructed access along the gangway.

Trapeze with 4 meter long Dyneema ropes and carbon spreader bar. The ultra-light Dyneema ropes and the carbon spreader reduce the sagging of the trapeze under its own weight, allowing an unobstructed access along the gangway.

Available with 2 variants: 1) polyester lateral guys or 2) Dyneema lateral guys.

The polyester guys are built with a double polyester rope with a sliding SS carabiner on the gangway side, Block with V-Jam Cleat for adjustment and a loop to fix them to the boat.
The Dyneema (R) guys have a shorter double polyester rope joined with a Low Friction Ring to the Dyneema end rope on the gangway side.

The ultra-light carbon spreader bar reduces the halyard sagging over the gangway, leaving an unobstructed crossing. Being light it's also wider than normal steel spreader bars, further improving confort.