Dimensions: 220X39 cm
Alba 220 will bend about 2.5 cm for each 100 kg of weight, and weighs about 4.4 kg, with male pin, wheels on a safe rigid caster, and dock side eye bolts for trapeze and guys.
Signature UV protected carbon fiber finishing with grey non-slip tread finish.
Spare parts kit included.

Dimensions: 216x39 cm
UV protected carbon fiber finishing with non-slip tread.
(See below for different colors, yacht name or teak tread surface)
Integral carbon fiber hinges with anti-folding restraint.
With male pin, wheels dock side, and eye bolts for trapeze and guys.
Spare parts kit included.

Dimensions: 285x45 cm
UV protected carbon fiber finishing with non-slip tread.
(See below for different colors, yacht name or teak tread surface)
Integral carbon fiber hinges with anti-folding restraint.
With male pin, wheels dock side, and eye bolts for trapeze and guys.
Spare parts kit included.

Dimensions: 350X60 cm
UV protected carbon fiber finishing with non-slip tread.
(See below for different colors, yacht name or teak tread surface)
Integral carbon fiber hinges with anti-folding restraint.
With male pin, extra large wheels dock side, and eye bolts for trapeze and guys.
Spare parts kit included.

Available with 2 variants: 1) polyester lateral guys or 2) Dyneema lateral guys.

The polyester guys are built with a double polyester rope with a sliding SS carabiner on the gangway side, Block with V-Jam Cleat for adjustment and a loop to fix them to the boat.
The Dyneema (R) guys have a shorter double polyester rope joined with a Low Friction Ring to the Dyneema end rope on the gangway side.

Trapeze with 4 meter long Dyneema ropes and carbon spreader bar. The ultra-light Dyneema ropes and the carbon spreader reduce the sagging of the trapeze under its own weight, allowing an unobstructed access along the gangway.

Trapeze with 4 meter long Dyneema ropes and carbon spreader bar. The ultra-light Dyneema ropes and the carbon spreader reduce the sagging of the trapeze under its own weight, allowing an unobstructed access along the gangway.

Available with 2 variants: 1) polyester lateral guys or 2) Dyneema lateral guys.

The polyester guys are built with a double polyester rope with a sliding SS carabiner on the gangway side, Block with V-Jam Cleat for adjustment and a loop to fix them to the boat.
The Dyneema (R) guys have a shorter double polyester rope joined with a Low Friction Ring to the Dyneema end rope on the gangway side.

The ultra-light carbon spreader bar reduces the halyard sagging over the gangway, leaving an unobstructed crossing. Being light it's also wider than normal steel spreader bars, further improving confort.

Distributes the loads over a bigger surface around the cutout for the socket, producing a stronger fitting with less risk of damage to the deck. Requires the use of nuts and washers.

Machined from solid 316 SS with protective collar to prevent scratches.
Standard variant with polimer bushing; Key-comp variant withour bushing, to be used only with gangways adapted to key lockable sockets.

Only 60 mm wide, to be installed on narrow toe-rails or gunwales. Standard variant with polimer bushing; Key-comp variant withour bushing, to be used only with gangways adapted to key lockable sockets.

Standard variant with polimer bushing; KEY with key-locking socket installed; KEY-COMP variant without bushing, to be used only with gangways adapted to key-locking sockets.

Needs polymer bushing on the T pin of the gangway (included in the price). Compatible with EE203.05-KEYCOMP and EC1210.02-KEYCOMP.

At the moment there is no variant of this aluminum socket compatible with the key lockable socket.